SPEED BUMPS, CAR STOPS, DOCK BUMPERS & INSTALLATION HARDWARE

Speed Bumps & Car Stops

Help control drivers in dangerous areas while protecting people and property. One person installation makes them attractive for traffic control. Easy to remove for snow removal, seal coating or change of location. Constructed of lightweight recycled plastic. Resists marring by oil, road salt, sunlight, and chemicals. Unlike lumber, it does not leach out polluting chemicals. Resists rotting, termite damage and corrosion. No costly painting or maintenance.

Safety yellow SPEED BUMPS feature 1" x 1" cable channels and includes hardware.

CAR STOPS are available in a variety of colors: safety yellow, blue (ideal for handicap spaces), gray or white. Hardware kits sold separately.

Asphalt Kit includes 3 spikes and butyl tape.

The Concrete Hardware Kit includes 3 bolts, anchors and washers.

Extruded Bumpers

Protect against the heavy impact and damaging results of semi-trailers and trucks with these Extruded Fender Bumpers. Made of all weather and abrasion resistant rubber. The half-oval shape allows for effective fendering action over a wide radius. A metal plate is located inside 4" and 6" projection bumpers for support, while the 2" unit comes with one washer per hole. Installation hardware not included.

TYPE A - M-2-SERIES
- 3/8" Mounting Holes
- 5/8" access hole for fasteners
TYPE B - M-4-SERIES
- 5/8" Mounting Holes
- 1-1/4" Access Hole for Fasteners
TYPE C - M-6-SERIES
- 5/8" Mounting Holes
- 1-1/4" Access Hole for Fasteners

4.5" Projection Laminated Dock Bumpers & 6" Projection Laminated Dock Bumpers

Laminated style dock bumpers provide durable, economical protection for your loading dock and trailers. Units are constructed of fabric reinforced rubber from recycled truck tires. Pads are laminated between painted structural angles and held together with 3/4" steel tie rods. Installation is quick and easy by bolting or welding units to dock. Width is bolt hole center to bolt hole center. Bolt holes are 13/16" in diameter. Installation hardware available separately, see below. Recommended installation with laminated pads in vertical position as shown (Type B below).

TYPE A - HORIZONTAL BUMPER
TYPE B - VERTICAL BUMPER
TYPE C - ANGLE FLAT BUMPER

Specialty Molded Dock Bumpers

High Impact Resistant. Will not warp, rust, rot, or harden. Manufactured from fiber reinforced prime rubber containing nylon and polyester. These molded bumpers are built to endure years of abusive pounding. All units have predrilled countersunk mounting holes for easy installation. Units are drilled to accept 3/4" anchor bolts. Plastic face bumper, model B-1213-4PF, features two piece construction fully assembled and ready for installation. Installation hardware sold separately.

TYPE A
TYPE B
TYPE C
TYPE D
TYPE E
TYPE F
TYPE G

Trailer Crane Bumpers

Manufactured from fiber reinforced prime rubber containing nylon and polyester. These Trailer Crane Bumpers resist abrasion, impact, wear and corrosion. They are impervious to weather damage. All models have predrilled, countersunk mounting holes for easy installation. Bolt hole diameter is 1/2" with the exception of model TB-90 at 3/4". Installation hardware not included.

Extruded Bumper Stops

Ideal for building and machinery protection. Bumper Stops are excellent for protecting vehicles when parking places are located next to building walls. Made of strong, durable, high impact resistant solid rubber. Easy installation either horizontally or vertically. Uses 3/4" flat head anchor bolts. Installation hardware not included.


Hardened Molded Bumpers

These predrilled bumpers are constructed of fiber reinforced rubber containing nylon and polyester. High impact resistance and immune to all weather conditions. Steel reinforcement rings are molded into each bumper for installation. Uses 3/4" anchor bolts. Sold individually. Installation hardware not included.

Installation Hardware

Installing bumpers is no longer a chore with concrete anchor bolts! Use 4" long anchors with Laminated Bumpers. Use 6" long anchors for Molded Bumpers.

Sold individually.

Dock Safety Guides

Highly visible reflective caution signs are constructed from aluminum. Bolt directly to your loading dock to help guide drivers as they back into the loading dock.

SPEED BUMPS - INSTALLATION HARDWARE INCLUDED
MODEL #
SIZE WxHxL
HARDWARE
KIT INC.
COLOR
NET WT.
PRICE
QTY.
SB-36
10" x 2" x 70"
CONCRETE
YELLOW
43 lbs.
$125.00
SBA-36
10" x 2" x 70"
ASPHALT
YELLOW
43 lbs.
$139.00
SB-108
10" x 2" x 106"
CONCRETE
YELLOW
62 lbs.
$200.00
SBA-108
10" x 2" x 106"
ASPHALT
YELLOW
62 lbs.
$223.00
SBS-1012
REFLECTIVE SIGN - CAUTION: SPEED BUMP
1 lb.
$ 21.40
CAR STOPS - INSTALLATION HARDWARE SOLD SEPARATELY, NOT INCLUDED
MODEL #
SIZE WxHxL
COLOR
NET WT.
PRICE
QTY
CS-33-G
5-3/4" x 3-1/4" x 72"
GRAY
40 lbs.
$70.00
CS-33-Y
5-3/4" x 3-1/4" x 72"
YELLOW
40 lbs.
$70.00
CS-33-B
5-3/4" x 3-1/4" x 72"
BLUE
40 lbs.
$70.00
CS-33-W
5-3/4" x 3-1/4" x 72"
WHITE
40 lbs.
$70.00
CS-AK
ASPHALT HARDWARE KIT (3 SPIKES & BUTYL TAPE)
3 lbs.
$27.00
CS-33-KIT-3
CONCRETE HARDWARE KIT (3 BOLTS & ANCHORS)
4 lbs.
$18.00
EXTRUDED DOCK BUMPERS
INSTALLATION HARDWARE SOLD SEPARATELY - NOT INCLUDED
MODEL #
TYPE
SIZE LxWxH
NET WT.
PRICE
QTY
M-2-12
A
12" x 2" x 1-3/4"
2 lbs.
$12.00
M-2-18
A
18" x 2" x 1-3/4"
4 lbs.
$14.00
M-2-24
A
24" x 2" x 1-3/4"
6 lbs.
$18.00
M-2-36
A
36" x 2" x 1-3/4"
8 lbs.
$22.00
M-2-120*
A (no holes)
120" x 2" x 1-3/4"
20 lbs.
$66.00
M-4-12
B
12" x 4-1-4" x 4"
6 lbs.
$19.00
M-4-18
B
18" x 4-1-4" x 4"
8lbs.
$25.00
M-4-24
B
24" x 4-1-4" x 4"
11 lbs.
$32.00
M-4-36
B
36" x 4-1-4" x 4"
17 lbs.
$48.00
M-4-120*
B (no holes)
120" x 4-1-4" x 4"
60 lbs.
$275.00
M-6-12
C
12" x 6" x 6"
11 lbs.
$37.00
M-6-18
C
18" x 6" x 6"
16 lbs.
$53.00
M-6-24
C
24" x 6" x 6"
20 lbs.
$66.00
M-6-36
C
36" x 6" x 6"
31 lbs.
$96.00
M-6-120*
C
120" x 6" x 6"
110 lbs.
$275.00
*$35.00 SKID CHARGE WHEN ORDERING LESS THAN 50 FEET TOTAL (120" LONG)
4.5" PROJECTION LAMINATED DOCK BUMPERS
INSTALLATION HARDWARE SOLD SEPARATELY - NOT INCLUDED
MODEL #
TYPE
OVERALL SIZE
HxWxP
SHIPS
VIA
NET WT.
PRICE
QTY
1012-4.5
A
10" x 12" x 4-1/2"
UPS
29 lbs.
$40.00
1014-4.5
A
10" x 14" x 4-1/2"
UPS
32 lbs.
$42.00
1018-4.5
A
10" x 18" x 4-1/2"
UPS
36 lbs.
$49.00
1024-4.5
A
10" x 24" x 4-1/2"
UPS
47 lbs.
$58.00
1030-4.5
A
10" x 30" x 4-1/2"
UPS
60 lbs.
$65.00
1036-4.5
A
10" x 36" x 4-1/2"
UPS
72 lbs.
$72.00
1096-4.5
A
10" x 96" x 4-1/2"
TRUCK
216 lbs.
$271.00
1212-4.5
A
12" x 12" x 4-1/2"
UPS
30 lbs.
$41.00
1214-4.5
A
12" x 14" x 4-1/2"
UPS
35 lbs.
$43.00
1218-4.5
A
12" x 18" x 4-1/2"
UPS
42 lbs.
$53.00
1224-4.5
A
12" x 24" x 4-1/2"
UPS
57 lbs.
$66.00
1230-4.5
A
12" x 30" x 4-1/2"
UPS
66 lbs.
$74.00
1236-4.5
A
12" x 36" x 4-1/2"
UPS
85 lbs.
$91.00
1296-4.5
A
12" x 96" x 4-1/2"
TRUCK
333 lbs.
$316.00
624-4.5
A
6" x 24" x 4-1/2"
UPS
32 lbs.
$49.00
636-4.5
A
6" x 36" x 4-1/2"
UPS
45 lbs.
$60.00
1014-4.5F
C
10" x 14" x 4-1/2"
UPS
32 lbs.
$58.00
1214-4.5F
C
12" x 14" x 4-1/2"
UPS
36 lbs.
$59.00
V-1120-4.5
B
20" x 11" x 4-1/2"
UPS
48 lbs.
$56.00
V-1124-4.5
B
24" x 11" x 4-1/2"
UPS
57 lbs.
$64.00
V-1130-4.5
B
30" x 11" x 4-1/2"
TRUCK
72 lbs.
$84.00
V-1136-4.5
B
36" x 11" x 4-1/2"
TRUCK
86 lbs.
$96.00
6" PROJECTED LAMINATED DOCK BUMPERS
INSTALLATION HARDWARE SOLD SEPARATELY - NOT INCLUDED
MODEL #
TYPE
OVERALL SIZE
HxWxP
SHIPS
VIA
NET WT.
PRICE
QTY
1012-6
A
10" x 12" x 6"
UPS
32 lbs.
$50.00
1014-6
A
10" x 14" x 6"
UPS
35 lbs.
$52.00
1018-6
A
10" x 18" x 6"
UPS
40 lbs.
$66.00
1024-6
A
10" x 24" x 6"
UPS
62 lbs.
$72.00
1030-6
A
10" x 30" x 6"
UPS
73 lbs.
$80.00
1036-6
A
10" x 36" x 6"
UPS
84 lbs.
$98.00
1212-6
A
12" x 12" x 6"
UPS
36 lbs.
$53.00
1214-6
A
12" x 14" x 6"
UPS
46 lbs.
$56.00
1218-6
A
12" x 18" x 6"
UPS
55 lbs.
$70.00
1224-6
A
12" x 24" x 6"
UPS
66 lbs.
$80.00
1230-6
A
12" x 30" x 6"
UPS
87 lbs.
$96.00
1236-6
A
12" x 36" x 6"
TRUCK
105 lbs.
$118.00
1296-6
A
12" x 96" x 6"
TRUCK
280 lbs.
$463.00
V-1120-6
B
20" x 11" x 6"
TRUCK
68 lbs.
$82.00
V-1124-6
B
24" x 11" x 6"
TRUCK
82 lbs.
$90.00
V-1130-6
B
30" x 11" x 6"
TRUCK
105 lbs.
$140.00
V-1136-6
B
36" x 11" x 6"
TRUCK
127 lbs.
$145.00
SPECIALTY MOLDED DOCK BUMPERS
INSTALLATION HARDWARE SOLD SEPARATELY - NOT INCLUDED
MODEL #
TYPE
DESCRIPTION
SIZE
LxWxP
NET WT.
PRICE
QTY
B-1224-3
A
RECTANGULAR SHAPED BUMPER
24" x 12" x 3"
33 lbs.
$42.00
B-1224-6
A
RECTANGULAR SHAPED BUMPER
24" x 12" x 6"
55 lbs.
$89.30
T-22
B
T-SHAPED MOLDED BUMPER
22" x 22" x 3"
43 lbs.
$51.00
B-1213-4
C
MOLDED BUMPER
12" x 13" x 4"
24 lbs.
$49.20
B-1213-4PF
D
PLASTIC FACE MOLDED BUMPER
12" x 13" x 4"
24 lbs.
$122.50
RF
D
REPLACEMENT FACE FOR B-1213-4PF ONLY
1 lb.
$65.00
L-1818-4
E
L-SHAPED MOLDED BUMPER
18" x 18" x 4"
36 lbs.
$55.90
B-516
F
RECTANGULAR SHAPED BUMPER
16" x 5" x 2"
7 lbs.
$25.00
B-818
G
RECTANGULAR SHAPED BUMPER
18" x 8" x 2"
14 lbs.
$38.80
B-516-SF
- - -
STEEL FACED MOLDED BUMPER
5" x 16" x 2"
24 lbs.
$52.90
B-818-SF
- - -
STEEL FACED MOLDED BUMPER
8" x 18" x 2"
44 lbs.
$63.00
TRAILER CRANE BUMPERS
INSTALLATION HARDWARE SOLD SEPARATELY - NOT INCLUDED
MODEL #
SIZE
LxWxP
NET WT.
PRICE
QTY
TB-10
2-1/2" x 6" x 3-1/2"
2 lbs.
$23.90
TB-20
3-1/2" x 6" x 3-1/2"
4 lbs.
$24.80
TB-70
2-1/4" x 16" x 2"
5 lbs.
$25.10
TB-90
5-1/4" x 8" x 3-1/2"
6 lbs.
$29.30
EXTRUDED BUMPER STOPS
INSTALLATION HARDWARE SOLD SEPARATELY - NOT INCLUDED
MODEL #
SIZE
LxWxP
NET WT.
PRICE
QTY
BS-12
5-1/2" x 12" x 1-1/4"
4 lbs.
$22.00
BS-18
5-1/2" x 18" x 1-1/4"
5 lbs.
$25.00
BS-24
5-1/2" x 24" x 1-1/4"
7 lbs.
$29.80
BS-36
5-1/2" x 36" x 1-1/4"
11 lbs.
$40.00
HARDENED MOLDED BUMPERS
INSTALLATION HARDWARE SOLD SEPARATELY - NOT INCLUDED
MODEL #
SIZE
LxWxP
NET WT.
PRICE
QTY
DBE-10-1
4-1/2" x 10" x 3"
7 lbs.
$19.10
DBE-20-1
4-1/2" x 20" x 3"
14 lbs.
$37.00
DBE-30-1
4-1/2" x 30" x 3"
20 lbs.
$54.80
INSTALLATION HARDWARE - CONCRETE ANCHOR BOLTS & MASONRY BIT
MODEL #
SIZE & BUMPER IT ACCOMMODATES
NET WT.
PRICE
QTY
AS-344 3/4" x 4" FOR LAMINATED BUMPERS 1 lb. $4.20
AS-346 3/4" x 6" FOR MOLDED BUMPERS 1 lb. $4.55
AS-584 5/8" x 6" FOR EXTRUDED BUMPERS 1 lb. $3.70
BIT-3/4 3/4" DIAMETER MASONRY BIT 1 lb. $15.30
DOCK SAFETY GUIDES
MODEL #
DESCRIPTION
NET WT.
PRICE
QTY
DSR-28
(2) REFLECTIVE ALUMINUM "CAUTION" SIGNS
12 lbs.
$90.00
HOME
DOCK ACCESSORIES
CHECKOUT